Map Trunk Refurbish pt. 1

I found this trunk at the usual place, an estate sale. It looked pretty terrible, but it was really sound structurally. It was sturdy, the latches worked really well and lined up perfectly. Excellent candidate for a project. First, to prep the trunk, was the usual sanding process. You can see the difference here, from where the top is sanded and the bottom wasn’t..

Then the whole thing. The interior panels were just plywood, so not really worth sanding down.

When I was re-doing the Dome Top Steamer Trunk, I was thinking of different ways I could re-finish its interior. Ultimately, leaving the bare wood the way it was won out on that trunk, but one of the ideas I came up with was using some of these maps I had as a covering. These maps weren’t super old and full of character. They were from the era just before GPS and Google maps, so they were kind of ugly and obnoxious. I used some different stains and paint on a test piece to see what I could come up with. Two different stains and some dark brownish paint later, and this was the result…

I was pretty excited with how it turned out! It kind of had an old leather map look. Huge improvement! The next step was to cut the map pieces down to size.

I ALMOST cut the piece too small because I didn’t take into account that I was going to scrunch it up for texture. That shrunk it down quite a bit, but thankfully it still worked out. Next, I tried to stick the map to the trunk using 3M Spray adhesive. As soon as I applied the stain to the paper, it completely detached from the wood. Time to break out the Mod Podge! Worked like a charm.

I applied the lighter stain to the whole map…

Then I worked the darker stain around the outside and then lightly through the middle. The final touch was the dark brown paint only around the edges. I used the same old rag that applied the stain to blend in the edges of the paint with the stain.

Tada!! Lastly was a coat of polyurethane and it was finished! My favorite part about the maps is that both sections have locations in them that have been major parts of my life.

I’m still toying with the idea of using something to line the map and make the edges cleaner, but we’ll see. There are also big plans for the interior, but they’re still in progress. I’ll keep you posted!!

The “Wing It” Bench

I came across this bench at an estate sale a WHILE ago. It looked like a disaster, but it was such a sturdy little thing I couldn’t pass it up. It came home with me and there it sat for months, like over 12 of them. Finally a few weeks ago I started on the sanding process. It was definitely a process.

It was surprising how easily the stain and the majority of the ugly blotches came out. It was a terrible stain job too, sloppy and so thick you couldn’t see any of the wood grain. After I finished the sanding, it sat in the garage for a few more weeks because I still had no clue what to do with it.

Inspiration came from digging through all of the random paint and stain cans that I’ve acquired from the Home Depot Oops Paint section.

I had some reddish weatherproofing wood treatment that I’d been wanting to use. Ironic since I hated the red that was on the bench originally. It would have been too gaudy to make the whole thing red, so I went with just the legs. There was also a new stencil that hadn’t been used yet, so now was as good a time as any…

A little distressing, some regular polyurethane and it was finished. It was fun to go into a project and just wing it.

Hello!

This is a special welcome to everyone being referred over from Domestic Imperfection and everyone that I just met at the World Travel Market, here in London (Still can’t believe I’m here!). Actually, HELLO if you’re coming to this site by any other means too. I love visitors! For all the Newbies, here is a quick rundown on Two Thumbs…

Have you ever heard someone who just had something exciting happen, like winning concert tickets, say, “Who has two thumbs and just won tickets to the concert this Saturday?” Then they probably point at themselves and say “this girl!” or “I did!” Well that’s what I was thinking when I was starting this blog. “Hey, I’m a blogger now.” That’s it. There wasn’t a ton of thought that went into the name, but now I think it’s perfect. This site is a little bit of everything: photography, travel, DIY projects… So to me, It’s about the things you can accomplish when you get up off the couch, away from the TV and make experiences happen. Ten months ago, I was saying, “Who has two thumbs and just started a blog?” and in less than a year it turned into, “Who has Two Thumbs and is in London with a press pass to the World Travel Market and also had two projects featured (my telephone table and panel wall) on one of her favorite DIY websites?” This girl!

Anyway, first official day of WTM tomorrow and many other exciting things in the works, so you’ll be hearing from me again soon. For live updates, follow me on Twitter and Instagram @CorneliaJoy. In the mean time, take a look around and let me know what you think!

DIY Plank Wall Mantel

The mantel in our house has more or less been a giant eyesore since I can remember. It didn’t always look as bad as it does in the before picture, though. It had a bunch of cheesy square mirrors on the top and sides. We took those off, and it sat in that sad state for longer than I’d like to admit. The stack of wood was purchased probably two months ago. I had the idea for a plank wall and we saw a nice bunch of wood in the discount pile in Home Depot. In total, all of the wood for the project was less than $9. There was a few things that I had to do, before cutting and mounting the wood…

There were giant holes where the shelf was bolted to the wall, and also one of the fake bricks was missing from the framing of the fireplace. I used Rock Hard to fill in the holes, and (more or less) made a fake, fake brick to blend in the gap. The “bricks” around the fireplace aren’t actual bricks, so that’s why it’s a “fake, fake brick.”  It’s not perfect, but it did the trick for now. Before painting the bricks, it’s also important to vacuum and wipe down all the crevices. It’s easy for dust to hide in there and ruin the paint job.

Cutting the wood was surprisingly easy. I give 100% credit to the nice miter saw that I got at an estate sale for $20. I got the idea for the chevron shape of the wood from a friendly older gentleman at Home Depot. I was telling him about why I was collecting all that wood and he said, “You know there’s a really simple way to make your wall look really fancy…” You just set the miter saw to a 45 degree angle, measure and cut. All I needed to attach the planks were 1.5in finishing nails and voila! It was up!

Next came the caulking…

Then the paint…

The bare wood looked great, but I wanted to try the white wash treatment. We’re also supposed to install some marble on the bottom, so I thought the raw wood and the marble might be too busy. I didn’t use an official measurement for the paint, just a plastic cup with some paint and added water until the mixture seemed about right. Very precise…

I’m in love with that incense jar…

So that’s that! I’m not brave enough to try to do anything with the marble right now, but I’ll post pictures of it when it eventually gets done. If you’re thinking of doing a plank wall, do it! It’s easier than you’d think and they look fantastic. For another great tutorial on planking an entire room, check out Domestic Imperfection… Leave me some comments with questions or suggestions. It’s always appreciated!

Dome Top Trunk part 2

It’s finished!! I already did the first post on the exterior, and now the interior is done. I’m so happy with it! This is how the inside started…

It was covered with several layers of awful greenish grey paper. Surprisingly, all it took to scrape that off was wetting it with a sponge and scraping. Lots of scraping..

I didn’t really have a plan for the interior. Well, actually I had several plans, but I wanted to wait and see what exactly I had to work with when I was done with the scraping. I toyed with the idea of modpodging an old map on the underside of the top, or using some of these sheets from Home Depot..

But the wood was looking pretty decent on it’s own..

Not too shabby! I thought I’d try a little stain and see how it turned out…

I always think that natural wood is prettier than any painting or paper. Also, the curvature of the inside of the top would make covering it with any paper or vinyl tiles very tricky (ain’t nobody got time for that). Natural wood it is! Lastly, I added the side bars back on, where they were previously, and made a box for the interior.

(I’ll do a separate tutorial on making the box, don’t want to cram too much in one post.)

…and the finished product…

A few side notes….

The wood in the top of the trunk was definitely different from what was used to make the rest of it. Before I stained the interior all the wood looked the same, but after the stain, the top turned a yellowish brown while the rest was reddish. So, if you look at the tray insert in comparison to the top, it won’t quite match, while it does still match the rest of the trunk.

It took three coats of two different stains to get the new wood on the tray and sidebars to match the trunk. There could have been a stain that matched it identically, but who wants to buy more cans of stain when I already have so many sitting in the garage? One coat of Sedona Red and too coats of English Chestnut, both by Minwax, and it matched almost perfectly. Close enough for me!

It looks fantastic in the office where it’s sitting. Once that room is complete, I’ll post pictures of it in all of it’s pirate-y glory.

Dome Top Steamer Trunk Repair

First, let me start by saying, “What a lot of work!” Especially compared to the first trunk I refinished. Secondly, I am so excited to write this post. I’ve had this thing for months and I’ve only been able to work on it a little bit at a time. Let’s go back to the beginning, shall we? You can see the original in the before and after picture. Apparently someone thought they would try their hand at refinishing it by painting those awful green stripes and white accents. First I tried to see if I could get the paint off by sanding, scraping and paint thinner…

After a good hour of that nonsense, I gave up and decided that painting over it would be the next best option. In the picture above, you can see I’d already given up on getting the green off and started filling in holes and taping off the wood areas. That pretty much covers the next step in the refinishing. I used regular spackling past to fill the holes and larger dents. I left the old leather on the trunk until after I painted it and covered the areas where it had already crumbled off with newspaper and tape. This part was the most tedious. Not only does it take a long time, but it doesn’t get any prettier while you’re doing it…

Things started looking up after the first coat of spray paint, though…

Finally, no more ugly green…

Few things are more satisfying than peeling back clean paint lines. Look at that, what an improvement already. The paper peeled off really easily, but I had to use a box cutter and screw driver to get the leather off. There was also some glue residue left, but a little sanding and scrubbing with a wire brush took it off pretty easily.

Next came the stain. Minwax, Colonial Maple…

Even better, but it needed more shine. I found a gallon of polyurethane for floors at the Home Depot in the secret little scratch and dent section in the back for $9. I googled as much as I could about it, and I couldn’t find anything about using floor polyurethane on projects other than floors. I figured, “What’s the worst that could happen?” It could look absolutely fantastic, that’s what!

After the first coat, some of the edges and knots soaked up the shine, but the second coat took care of that. The last thing that needed to be fixed on the exterior was the feet. I got a 50 cent piece of wood from the scrap section in Home depot and some furniture sliders.

I also used more power tools on this project than I ever have before. First it was my miter saw to cut the scrap wood down to the right size, then electric drills to attach the wood and sliders to the bottom of the trunk. I was pretty proud of myself…

The reason I had to make a new base was because one of the metal feet was missing and I have no clue at this point about how to replace it…

Also, I can’t imagine the trunk sliding around on those metal knobs would be good for anyone’s floors. I thought about adding wheels instead of sliders, but they were all ugly. It seemed like it would just look awkward. This covers everything that I did to the outside. I have some ideas for the inside that I’m really excited about, but that’s for another post…

What project isn’t complete without some help from the cat…

An Excuse for the Beach…

There are two benefits from thrifting for beach equipment. 1. What house doesn’t have a few things that were bought for a family beach trip, used only one time and then stored in the garage for the next however many years? This means you can buy those things, barely used, and at a fraction of a cost. 2. Once you have it, you have the perfect excuse to go to the beach!

For example:

$2 for both of those watermelon umbrellas. They aren’t just regular “Stick them in the ground and hope they stay put” umbrellas.  They’ve got nice clamps on the end, so you can attach them to your beach tables or chairs.

$1.50 for the beach blanket / tablecloth. Much nicer than a towel because you’ll have room too move around and set down your things without covering them in sand.

In the event that the weather turns gloomy while you’re out at the beach, as it did with me, don’t worry. That’ll just give you time to check some of the local thrift stores where you’ll find things like super groovy cowgirl boots…

A large, shaggy, pleather jacket…

Or a nice straw hat for your next beach trip…

Happy Summer!

Latte Luna

What town, large or small, shouldn’t have a locally run coffee house with friendly staff, tasty treats and cozy atmosphere? Bradenton finally got their own a few weeks ago when Latte Luna opened up.

It’s right on Manatee Ave in an old frame house from the 1920’s. There are plenty of comfy places to sit inside. That makes it easy to spend hours socializing and sipping coffee, tea or maybe even a milkshake.

It is always good to support small business. Not only does the company provide jobs in your area, but all the money goes back into the local economy, and not to some big corporate office somewhere else. Latte Luna is also committed to giving back in other ways. All of the tips that they receive go to various charities, and the charity changes each month.. How great is that? So next time you are out and about, skip the Starbucks and stop in Latte Luna for your cup of joe.

Tennessee Thrift: part 1

I bought so many clothes on this last trip to Tennessee that I had to buy a second bag to get them all home! There were many great thrift stores, so it was hard to resist! My favorite one BY FAR was called “Pre to Post Modern,” just outside of Nashville. They had so many adorable clothes from every era..

I didn’t actually buy anything here because I was already over spent, but there were such good finds. I LOVED this jacket, but leather jackets are far from optimal in Florida.. 😦

Bed Jacket anyone?

Hats? Yes, please.

I need this light…

I took mostly video (go watch it!) here, so my photos don’t do it justice. I promise if you’re in the area and you stop in, you won’t be disappointed. The address is..2110 8th Ave S, Nashville, TN 37204…

Tennessee Video 2013

This is just a glimpse into my trip from last week. It’s one of the best trips I have ever had! I can’t wait to go back to Nashville!

Also, if you haven’t seen my New York or Las Vegas videos, you should!