Map Trunk Refurbish pt. 1

I found this trunk at the usual place, an estate sale. It looked pretty terrible, but it was really sound structurally. It was sturdy, the latches worked really well and lined up perfectly. Excellent candidate for a project. First, to prep the trunk, was the usual sanding process. You can see the difference here, from where the top is sanded and the bottom wasn’t..

Then the whole thing. The interior panels were just plywood, so not really worth sanding down.

When I was re-doing the Dome Top Steamer Trunk, I was thinking of different ways I could re-finish its interior. Ultimately, leaving the bare wood the way it was won out on that trunk, but one of the ideas I came up with was using some of these maps I had as a covering. These maps weren’t super old and full of character. They were from the era just before GPS and Google maps, so they were kind of ugly and obnoxious. I used some different stains and paint on a test piece to see what I could come up with. Two different stains and some dark brownish paint later, and this was the result…

I was pretty excited with how it turned out! It kind of had an old leather map look. Huge improvement! The next step was to cut the map pieces down to size.

I ALMOST cut the piece too small because I didn’t take into account that I was going to scrunch it up for texture. That shrunk it down quite a bit, but thankfully it still worked out. Next, I tried to stick the map to the trunk using 3M Spray adhesive. As soon as I applied the stain to the paper, it completely detached from the wood. Time to break out the Mod Podge! Worked like a charm.

I applied the lighter stain to the whole map…

Then I worked the darker stain around the outside and then lightly through the middle. The final touch was the dark brown paint only around the edges. I used the same old rag that applied the stain to blend in the edges of the paint with the stain.

Tada!! Lastly was a coat of polyurethane and it was finished! My favorite part about the maps is that both sections have locations in them that have been major parts of my life.

I’m still toying with the idea of using something to line the map and make the edges cleaner, but we’ll see. There are also big plans for the interior, but they’re still in progress. I’ll keep you posted!!

Dome Top Steamer Trunk Repair

First, let me start by saying, “What a lot of work!” Especially compared to the first trunk I refinished. Secondly, I am so excited to write this post. I’ve had this thing for months and I’ve only been able to work on it a little bit at a time. Let’s go back to the beginning, shall we? You can see the original in the before and after picture. Apparently someone thought they would try their hand at refinishing it by painting those awful green stripes and white accents. First I tried to see if I could get the paint off by sanding, scraping and paint thinner…

After a good hour of that nonsense, I gave up and decided that painting over it would be the next best option. In the picture above, you can see I’d already given up on getting the green off and started filling in holes and taping off the wood areas. That pretty much covers the next step in the refinishing. I used regular spackling past to fill the holes and larger dents. I left the old leather on the trunk until after I painted it and covered the areas where it had already crumbled off with newspaper and tape. This part was the most tedious. Not only does it take a long time, but it doesn’t get any prettier while you’re doing it…

Things started looking up after the first coat of spray paint, though…

Finally, no more ugly green…

Few things are more satisfying than peeling back clean paint lines. Look at that, what an improvement already. The paper peeled off really easily, but I had to use a box cutter and screw driver to get the leather off. There was also some glue residue left, but a little sanding and scrubbing with a wire brush took it off pretty easily.

Next came the stain. Minwax, Colonial Maple…

Even better, but it needed more shine. I found a gallon of polyurethane for floors at the Home Depot in the secret little scratch and dent section in the back for $9. I googled as much as I could about it, and I couldn’t find anything about using floor polyurethane on projects other than floors. I figured, “What’s the worst that could happen?” It could look absolutely fantastic, that’s what!

After the first coat, some of the edges and knots soaked up the shine, but the second coat took care of that. The last thing that needed to be fixed on the exterior was the feet. I got a 50 cent piece of wood from the scrap section in Home depot and some furniture sliders.

I also used more power tools on this project than I ever have before. First it was my miter saw to cut the scrap wood down to the right size, then electric drills to attach the wood and sliders to the bottom of the trunk. I was pretty proud of myself…

The reason I had to make a new base was because one of the metal feet was missing and I have no clue at this point about how to replace it…

Also, I can’t imagine the trunk sliding around on those metal knobs would be good for anyone’s floors. I thought about adding wheels instead of sliders, but they were all ugly. It seemed like it would just look awkward. This covers everything that I did to the outside. I have some ideas for the inside that I’m really excited about, but that’s for another post…

What project isn’t complete without some help from the cat…

An Excuse for the Beach…

There are two benefits from thrifting for beach equipment. 1. What house doesn’t have a few things that were bought for a family beach trip, used only one time and then stored in the garage for the next however many years? This means you can buy those things, barely used, and at a fraction of a cost. 2. Once you have it, you have the perfect excuse to go to the beach!

For example:

$2 for both of those watermelon umbrellas. They aren’t just regular “Stick them in the ground and hope they stay put” umbrellas.  They’ve got nice clamps on the end, so you can attach them to your beach tables or chairs.

$1.50 for the beach blanket / tablecloth. Much nicer than a towel because you’ll have room too move around and set down your things without covering them in sand.

In the event that the weather turns gloomy while you’re out at the beach, as it did with me, don’t worry. That’ll just give you time to check some of the local thrift stores where you’ll find things like super groovy cowgirl boots…

A large, shaggy, pleather jacket…

Or a nice straw hat for your next beach trip…

Happy Summer!

My Favorite Father’s Day Quotes

Father’s Day is coming up, so I’ve rounded up a few of my favorite Father’s Day quotes…

“Thank you for being interested. Doesn’t sound much but it meant just about everything.”
– Pam Brown

“I just owe almost everything to my father [and] it’s passionately interesting for me that the things that I learned in a small town, in a very modest home, are just the things that I believe have won the election.”
– Margaret Thatcher

“A new father quickly learns that his child invariably comes to the bathroom at precisely the times when he’s in there, as if he needed company. The only way for this father to be certain of bathroom privacy is to shave at the gas station.”
– Bill Cosby

“He didn’t tell me how to live; he lived, and let me watch him do it.”
– Clarence Budington-Kelland

“Each day of our lives we make deposits in the memory banks of our children.”

Charles (Chuck) Swindoll

“A man ought to live so that everybody knows he is a Christian… and most of all, his family ought to know.”
DL Moody

“I do not like broccoli. And I haven’t liked it since I was a little kid and my mother made me eat it. And I’m President of the United States and I’m not going to eat any more broccoli.”
George H. W. Bush

“Fathers play a unique and important role in the lives of their children. As mentor, protector, and provider, a father fundamentally influences the shape and direction of his child’s character by giving love, care, discipline, and guidance. As we observe Father’s Day, our nation honors fatherhood and urges fathers to commit themselves selflessly to the success and well-being of their children. And we reaffirm the importance of fathers in the lives of their children. Raising a child requires significant time, effort, and sacrifice; and it is one of the most hopeful and fulfilling experiences a man can ever know. A father can derive great joy from seeing his child grow from infancy to adulthood. As a child matures into independence and self reliance, the value of a parent’s hard work, love, and commitment comes to fruition.

Responsible fatherhood is important to a healthy and civil society. Numerous studies confirm that children whose fathers are present and involved in their lives are more likely to develop into prosperous and healthy adults. Children learn by example; and they need their father’s presence as examples of virtue in their daily lives. A child’s sense of security can be greatly enhanced by seeing his parents in a loving and faithful marriage.”
George W. Bush

DeSoto Heritage Festival

I have a love/hate relationship with the DeSoto 5k. The thing that makes this race unique/fun/intimidating is that the whole course is lined with people..

That’s me in the orange shirt. We can pretend I am in first place if you ignore the older lady that you see way ahead of me.. Anyway, unless you’re this guy…

… then you are probably not really, really ridiculously good-looking when you run. I look gross, sweaty and like I might die at any moment..

… so the crowds can be pretty intimidating. That’s the hate part. The love part is that the people are also a great motivator. They are clapping and cheering the whole time. Plus there are lots of little kids that want high-fives along the way, like you’re some kind of pro-athlete. It’s very cute. I was also blessed enough to have some of my own family there…

Plus a new friend! Overall, it was a great race, and I would recommend it to anyone…. and now for one more ridiculously good-looking guy meme…