DIY Plank Wall Mantel

Pallet Mantle

The mantel in our house has more or less been a giant eyesore since I can remember. It didn’t always look as bad as it does in the before picture, though. It had a bunch of cheesy square mirrors on the top and sides. We took those off, and it sat in that sad state for longer than I’d like to admit. The stack of wood was purchased probably two months ago. I had the idea for a plank wall and we saw a nice bunch of wood in the discount pile in Home Depot. In total, all of the wood for the project was less than $9. There was a few things that I had to do, before cutting and mounting the wood…

IMG_1376

There were giant holes where the shelf was bolted to the wall, and also one of the fake bricks was missing from the framing of the fireplace. I used Rock Hard to fill in the holes, and (more or less) made a fake, fake brick to blend in the gap. The “bricks” around the fireplace aren’t actual bricks, so that’s why it’s a “fake, fake brick.”  It’s not perfect, but it did the trick for now. Before painting the bricks, it’s also important to vacuum and wipe down all the crevices. It’s easy for dust to hide in there and ruin the paint job.

Cutting the wood was surprisingly easy. I give 100% credit to the nice miter saw that I got at an estate sale for $20. I got the idea for the chevron shape of the wood from a friendly older gentleman at Home Depot. I was telling him about why I was collecting all that wood and he said, “You know there’s a really simple way to make your wall look really fancy…” You just set the miter saw to a 45 degree angle, measure and cut. All I needed to attach the planks were 1.5in finishing nails and voila! It was up!

Next came the caulking…

Caulk

Then the paint…

6X0A5229

The bare wood looked great, but I wanted to try the white wash treatment. We’re also supposed to install some marble on the bottom, so I thought the raw wood and the marble might be too busy. I didn’t use an official measurement for the paint, just a plastic cup with some paint and added water until the mixture seemed about right. Very precise…

DIY

I’m in love with that incense jar…

6X0A5236

So that’s that! I’m not brave enough to try to do anything with the marble right now, but I’ll post pictures of it when it eventually gets done. If you’re thinking of doing a plank wall, do it! It’s easier than you’d think and they look fantastic. For another great tutorial on planking an entire room, check out Domestic Imperfection… Leave me some comments with questions or suggestions. It’s always appreciated!

Advertisements

6 thoughts on “DIY Plank Wall Mantel

  1. Pingback: Hello! | Two Thumbs

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s